mamun_mse@ru.ac.bd
Room # 303, DR. M A Wazed Miah Academic Building, Rajshahi University, Rajshahi-6205, Bangladesh
MUHAMMAD ABDULLAH AL MAMUN
ASSOCIATE PROFESSOR
Materials Science & Engineering
- Education Summary
- B.Sc.(Raj.), M.Sc.(Raj), PhD (Japan)
- Research Interest
- Fiber, Polymer, Composite Materials, Waste Materials Recycling
Level | Institution | Year |
---|---|---|
Doctoral (PhD) |
Saitama University, Japan | 2017 |
Masters (Master of Science in Materials Science and Engineering) |
Rajshahi University | 2008 |
Bachelor/Honors (Bachelor of Science in Materials Science and Technology) |
Rajshahi University | 2007 |
Experience in Rajshahi University
Duration | Organization/Institute | Position |
---|---|---|
2020-01-01 to | Materials Science & Engineering | ASSOCIATE PROFESSOR |
2015-09-23 to 2019-12-31 | Materials Science & Engineering | ASSISTANT PROFESSOR |
2012-09-23 to 2015-09-22 | Materials Science & Engineering | LECTURER |
Experience in other Organization/Institute
Journal
1. |
Hrithita Aftab, G. M. Shafiur Rahman, Md. Kamruzzaman, Mubarak A. Khan, Md. Farhad Ali, Muhammad Abdullah Al Mamun *
"Development of Brewed Tea Waste Reinforced Jute Polyester Composites: Physical, Mechanical, Structural and Morphological Characterizations"
7(1), 1–16
Published: January 2024
|
2. |
Md. Abdus Sabur, G. M. Shafiur Rahman, Md. Kamruzzaman,
Md. Abdul Gafur, and Muhammad Abdullah Al Mamun
"Fabrication and Characterization of Nanocomposites Based on NiFe2O4
Nanoparticles and Epoxy Polymer"
13(08) 852-868
Published: July 2022
|
3. |
Hrithita Aftab, G. M. Shafiur Rahman, Md. Kamruzzaman, Mubarak A. Khan, Md. Farhad Ali, and Muhammad Abdullah Al Mamun*
"Physico-Mechanical Properties of Industrial Tea Waste Reinforced Jute Unsaturated Polyester Composites"
03,02, 42-49
Published: June 2022
|
4. |
Muhammad Abdullah Al Mamun, Md. Abdus Sabur, Md. Abdul Gafur, Hrithita Aftab, G. M. Shafiur Rahman
"Fabrication and Characterization of α-Fe2O3 Nanoparticles Dispersed Epoxy Nanocomposites"
Journal of Engineering Advancements, 2(02), 33-41.
Published: June 2021
|
5. |
Muhammad Abdullah Al Mamun, Md. Mehedul Hasan, Md. Farhad Ali2
and G. M. Shafiur Rahman
"Eco-Friendly Treatment of Green Banana Fiber in Compared to
Chemical Treatment"
J. Mater. Environ. Sci., 2021, Volume 12, Issue 6, Page 823-826
Published: June 2021
|
6. |
G. M. Shafiur Rahman, Muhammad Abdullah Al Mamun*, Hrithita Aftab, ZakiyaYasmin and Mubarak A. Khan
"Influence of CaCO3 Filler on Physico-Mechanical Properties of Jute
Fabric Reinforced polyester Composites"
7(9):18-25
Published: September 2020
|
7. |
T. Tasaki, Y. Guo, Q. Meng, M. A. A. Mamun, Y. Kasahara, S. Akasaka, and A. Fujimori
"Dependency of Nanodiamond Particle Size and Outermost-Surface Composition on Organo-Modification – Evaluation by Formation of Organized Molecular Films and Nano-Hybridization with Organic Polymers –"
ACS Appl. Mater. Interf., 9(16), 14379-14390, 2017
Published: April 2017
|
8. |
Muhammad Abdullah Al Mamun Yusuke Kasahara Taira Tasaki Atsuhiro Fujimori
"Spherulitic Formation and Characterization of Partially Fluorinated Copolymers and Their Nanohybrids with Functional Fillers"
Polym. Eng. Sci., 57(2), 161-171
Published: February 2017
|
9. |
Shuntaro Miura, Yusaku Shidara, Takeru Yunoki, Muhammad Abdullah Al Mamun, Yuji Shibasaki, Atsuhiro Fujimori
"High-Density Packing of Amorphous Polymer with Bulky Aromatic Rings in Interfacial Molecular Films"
218, 1600520
Published: January 2017
|
10. |
Muhammad Abdullah Al Mamun, Youichi Soutome, Qi Meng, and Atsuhiro Fujimori
"Flexible Transparent Fluorinated Nanohybrid with Innovative Heat-resistance Property -New Technology Proposal for Fabrication of Transparent Materials using "Crystalline" Polymer-"
J. Polym. Sci. B, Polym. Phys., 53, 1674-1690
Published: September 2015
|
11. |
Muhammad Abdullah Al Mamun, Youichi Soutome, Yusuku Kasahara, Qi Meng, Shuichi Akasaka and Atsuhiro Fujimori
"Fabrication of Transparent Nanohybrids with Heat Resistance using High-density Amorphous Formation and Uniform Dispersion of Nanodiamond"
ACS Appl. Mater. Interf, 7(32), 17792-17801
Published: July 2015
|
12. |
G. M. Shafiur Rahman, Muhammad Abdullah Al Mamun, Muhammad Shafiul Bashar, M. G. Mostafa, Md. Farhad Ali and Mubarak A. Khan
"A Study on Comparison between Recycled Waste Paper Reinforced Polymer Composite and Hardboard"
Raj. Uni. J. of Envir. Sci., 3, 9-15
Published: July 2014
|
13. |
G. M. Shafiur Rahman, Muhammad Abdullah Al Mamun and Mubarak A. Khan
"Effect of γ (Gamma)-Radiation on the Physico-mechanical Properties of Grafted Jute Fabric Reinforced Polypropylene (PP) Composites"
Fibers and Polymers,15(2), 340-346
Published: February 2014
|
14. |
G. M. Shafiur Rahman, Muhammad Abdullah Al Mamun and Shigeru Itoh
"Physico-mechanical Properties of Shock Wave Treated Jute Fiber Reinforced Composite Materials"
Int. J. Eng. Tech, 8(2) 786-792
Published: November 2011
|
Conference
1. |
Md Arafat Hossain Shourov, Mostofa Habib, Abhi Saha,G. M. Shafiur Rahman, Muhammad Abdullah Al Mamun, Hrithita Aftab
"Recycling of Agricultural Waste for Fabrication and Characterization of Polymer Matrix Composites"
International Conference on Climate Smart Agriculture & the 4AR
Published: October 2023
|
2. |
Md. Hasibul Hasan, Hrithita Aftab, G. M. Shafiur Rahman, Md. Abdus Sattar and Muhammad Abdullah Al Mamun
"Effect of wheat bran filler on the properties of jute fabric reinforced unsaturated polyester resin composites"
5th International Conference on Physics for Sustainable Development and Technology, ICPSDT-2023
Published: September 2023
|
3. |
Hrithita Aftab, G. M. Shafiur Rahman and Muhammad Abdullah Al Mamun
"Effect of brewed tea waste filler on the properties of jute fabric reinforced unsaturated polyester resin composites"
International Conclave on Materials, Energy & Climate, Dhaka University 19-20, 2022
Published: December 2022
|
4. |
M. A. A. Mamun, T. Tasaki, S. Akasaka, and A. Fujimori
"Fabrication of Transparent Fluorinated Nanohybrids Including Organo-modified Nanoparticles and Its Spherulitic Observation"
The 66th Society of Polymer Science Annual Meeting, Japan
Published: May 2017
|
5. |
M. A. A. Mamun, Y. Kasahara, T. Tasaki, and A. Fujimori
"Spherulitic Growth in Partially Fluorinated Copolymers and Their Nanohybrids with Functional Fillers"
The 65th Society of Polymer Science Symposium on Macromolecules, Japan
Published: September 2016
|
6. |
M. A. A. Mamun, T. Tasaki, Y. Kasahara, and A. Fujimori
"Flexible Transparent Fluorinated Nanohybrid with Innovative Heat-resistance Property–New Technology Proposal for Fabrication of Transparent Materials using "Crystalline" Polymer–"
25th Annual Meeting of Material Research Society, Japan
Published: December 2015
|
7. |
M. A. A. Mamun, Shuchi Akasaka, and A. Fujimori
"Fabrication of Flexible Transparent Films of Fluorinated Polymer / Nanofiller hybrid with Excellent Heat-resistant Property"
The 64th Society of Polymer Science Annual Meeting, Japan
Published: May 2015
|
SCHOLARSHIP AND AWARDS:
- Gold Medal award given
by Nawab Abdul Latif Hall, University of Rajshahi for academic
excellence
- National Science & Information and Communication
Technology (N.S.I.C.T.) Fellowship, 2011-2012
- Japanese Government (MEXT/Monbukagakusho) scholarship-2014
for post-graduation (PhD) program.
ADMINISTRATIVE EXPERIENCES
8. Member, Rajshahi University Agriculture Project
Advisory Committee
From 15-06-2021~till
date
http://www.ru.ac.bd/agrilproject/
7. Provost, Syed Amir Ali Hall, University
of Rajshahi
From 01-07-2020~till date
http://www.ru.ac.bd/sameralihall/
6. Member, Rajshahi University Estate Advisory Committee
From 00-00-0000~till date
http://www.ru.ac.bd/estatesection/
5. Member, Rajshahi University Vigilance Team, University of
Rajshahi
From 16-08-2018 ~ 15-08-2019 (2018-19), 02-10-2019 ~
01-10-2020 (2019-20) and 01-10-2020 ~ 30-09-2021 (2020-21)
4. Syndicate member, University of Rajshahi
From 24-04-2018 ~ 31-12-2019
http://www.ru.ac.bd/syndicate/
3. Convener, Rajshahi University Materials Science and Engineering Alumni Association
From 20-07-2019 ~ till date
https://www.facebook.com/groups/272734880594886
2. Treasurer, Jamalpur District
Welfare Society, Rajshahi
From 17-03-2018 ~ till date
https://www.facebook.com/groups/440509556150199/?multi_permalinks=1453073498227128
1. President, Bangladesh Association of Saitama
University, Japan
From 01-10-2015~ 31-03-2016
https://bdsaitamau.wordpress.com/role-of-honor/